2004 Only: Need Help With Axxes ASWC Steering Wheel Control Install - my6thgen.org

doub · 10-22-2012, 04:11 PM

Hi everyone, I don't speak english very well, forgave me.. I Have a 2004 maxima with bose audio but no nav.. and I try to install my aswc steering wheel control.. the indication colors pin doesn't macth.. this is the instructgion on axxessinterface.com for maxima 2004 .
Congratulations, your vehicle will be auto detected by the ASWC.
ASWC Connections
1) Connect the Black wire of the ASWC to ground. You may use the same grounding
point as the aftermarket radio.
2) Connect the Red wire of the ASWC to a 12 volt accessory wire, one that turns on and
off with the ignition key.
3) Connect the Gray/Red wire of the ASWC to pin 3 of the vehicle. Below is a picture of
4) Connect the White/Green wire of the ASWC to pin 10 of the vehicle.
5) Connect pin 2 of the vehicle harness to Ground.
6) All other wires on the ASWC please tape up, they will not be used..

But the problem are step 3, because.. I called axxess to figure out but, he said my 16 pin connection supposed to have pine 3 red with white stripe but my connection dond't have it. please someone can help me with point 3,4, and 5...

Picture of my connection wire will joined by attachement..
Thank you

**06BlckMax** · 10-22-2012, 04:16 PM

Pretty sure you got the wrong connector, is that the one thats behind the piece that cover the screen

doesnt look like it

Jony09 · 10-22-2012, 04:17 PM

Thats not the harness, the harness is the long white one

But I got an 07 so maybe you are right lol

Sent from my myTouch_4G_Slide

doub · 10-23-2012, 12:07 AM

thank you everybody, you've got right, I got the wrong plug.. Now everything work greast thank again.

**06BlckMax** · 10-23-2012, 12:13 AM

pringlescan · 11-27-2013, 12:27 PM

I can't find the connector.

Does it connect to the head unit (where the cassette and CD are) or does it connect to the screen/control cluster (climate and radio). Is it white or gray?

I checked all of the wires and non of them match the instructions that I could find with any steering wheel audio controls.

I have the base stereo (non-Bose) no nav.

Thanks,
Jeff

nemrod811 · 02-02-2014, 06:52 PM

Originally Posted by doub

thank you everybody, you've got right, I got the wrong plug.. Now everything work greast thank again.

Which plug was it after all? There's like 5 diff ones

nemrod811 · 02-02-2014, 06:53 PM

Originally Posted by doub

thank you everybody, you've got right, I got the wrong plug.. Now everything work greast thank again.

Which plug was it after all? There's like 5 diff ones

**EddyMaxx** · 03-13-2014, 10:10 PM

Can someone post a pic of the plug?

Latinmaxima · 03-13-2014, 10:40 PM

I will be tackling this over the weekend. I will try to make a walkthrough for it.

Posted Via Tapatalk

**EddyMaxx** · 03-14-2014, 07:25 AM

Originally Posted by Latinmaxima

I will be tackling this over the weekend. I will try to make a walkthrough for it.

Perfect, thanks bro. I was considering buying it but want to make sure its easy as they say to install.

Latinmaxima · 03-14-2014, 04:27 PM

No problem. I will take pics as well as have the wife record it. Then post that up.

Posted Via Tapatalk

Latinmaxima · 03-16-2014, 10:54 PM

So I am finished and I have a few pics and some video. I was alone though so I couldn't get the best shots while doing the work. For everyone's reference the plug used is the single plug that plugs into the factory controls. Its a small 16pin plug. It comes through the radio bracket near the ac controls.

I am going to make a small how to. I couldn't video programming but it basically auto programs. I tapped the volume up buttons and viola. I will add the how to video link once it is done.

Posted Via Tapatalk

**S.V** · 03-16-2014, 11:22 PM

Yup, was really easy when programming.

Posted Via Tapatalk

**EddyMaxx** · 03-17-2014, 06:27 PM

Just ordered mines from Amazon. It arrived on Wednesday. Did you guys just splice/heat-shrink into the wires?

Latinmaxima · 03-17-2014, 10:01 PM

I spliced, butt connectors, loom and electrical taped it.

Posted Via Tapatalk

brwnjk · 03-18-2014, 09:29 PM

Did you loose memory to seat and steering wheel? Did you get a cel after aftermarket install? I am feeling like I messed up somthing! I am getting a grnd amp error and no volume. Anyone have issues like me?

Posted Via Tapatalk

Latinmaxima · 03-19-2014, 09:59 AM

No I didn't have any of those issues. I think you have the wrong harness. And you definitely need to ground the amp and chassis. What aftermarket harness are you using. If anything on me and I can send you my number. Feel free to call or text after that.

Posted Via Tapatalk

Currently Active Users Viewing This Thread: 1 (0 Members And 1 Guests)