Register My Garage Arcade V.I.P Members List Calendar Mark Forums Read
Go Back   my6thgen.org - Maxima Forum > my6thgen.org - Very Useful Information > Ask Your Technical & General Questions > Engine, Trans, F/I & Tuning

Reply
ExclamationThis thread is more than 150+ days old. If you still feel it is necessary to bump this thread, you have the permission to do so. Please click the checkbox below and post your reply.
 
Thread Tools
Old 11-14-2012, 10:56 PM   Thread Starter #1
Official Member
my6thgen.org Profile Info.
 
Jony09's Avatar
 
Join Date: Sep 2011
Official Member #: 3079
Last Online: 10-08-2014 03:48 PM
Location: Houston
Posts: 385

Reputation Level: 8
Jony09 is an unknown quantity at this point

Participation Level: 0%
Activity: 0% Activity: 0% Activity: 0%
Default SES light

My light is on , throwing P2100 and P2101. While installing my grounding kit i moved upward the yellow part by unhooking whats on the red circle. I moved it out of the way to get better clearance and then got this codes. Car drives good so i dont know.
Click the image to open in full size.
Jony09 is offline   Send a private message to Jony09 Find more posts by Jony09 Add Jony09 to Your Friends list Reply With Quote top
Old 11-14-2012, 11:08 PM   #2
Senior Moderator

my6thgen.org Profile Info.
 
1hawaii50's Avatar
 
Join Date: Feb 2010
Official Member #: 63
Last Online: 11-03-2014 08:34 PM
Location: Cleveland, Ohio
Posts: 13,276

Reputation Level: 58
1hawaii50 has a spectacular aura about1hawaii50 has a spectacular aura about1hawaii50 has a spectacular aura about

Participation Level: 0%
Activity: 0% Activity: 0% Activity: 0%

My Awards:
Supporting Family Member  


/ Point Value: 10

Member of the Month (M.O.T.M)  


/ Point Value: 10

Most Valuable Poster (MVP)  


/ Point Value: 10

V.I.P Member  


/ Point Value: 15

Spotlight Ride Of The Month  


/ Point Value: 5

Active Member  


/ Point Value: 5

Official Ride  


/ Point Value: 10

Default Re: SES light

paging @BurntOrangeAppeal
__________________
1hawaii50 is offline   Send a private message to 1hawaii50 Find more posts by 1hawaii50 Add 1hawaii50 to Your Friends list Reply With Quote top
Old 11-15-2012, 12:01 AM   #3
Moderator
Burnt Orange
my6thgen.org Profile Info.
 
BurntOrangeAppeal's Avatar
 
Join Date: Aug 2011
Official Member #: 2887
Last Online: 12-04-2014 04:56 PM
Location: Under the Bridge
Posts: 2,816

Reputation Level: 33
BurntOrangeAppeal has a spectacular aura aboutBurntOrangeAppeal has a spectacular aura aboutBurntOrangeAppeal has a spectacular aura about

Participation Level: 0%
Activity: 0% Activity: 0% Activity: 0%
Default Re: SES light

P2100 > Throttle Control Motor Relay
P2101 > Electric Throttle Control Function

You either disconnected or pulled on the throttle plug/wires or your throttle body failed...
Makes sure everything is plugged in and the connector to the throttle body is ok and wires are not pulled out. Clear codes and perform the throttle re-learns below.

Conditions must be met.
No codes, engine at operating temp, all electrical loads off ie. headlights, heater, doors closed, handbrake not applied, steering wheel centered.

Accelerator Pedal Release Position Learning
Operation Procedure

1. Make sure that the accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF wait at least 10 seconds.

Throttle Valve Closed Position Learning
Operation Procedures

1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch is OFF? wait at least 10 seconds.
__________________
'04 SE 6MT, Elite.
'01 SE Anniversary.
'97 GXE.
Click the image to open in full size.
Click the image to open in full size.
-=My Build Tread=-
BurntOrangeAppeal is offline   Send a private message to BurntOrangeAppeal Find more posts by BurntOrangeAppeal Add BurntOrangeAppeal to Your Friends list Reply With Quote top
Old 11-15-2012, 12:17 AM   Thread Starter #4
Official Member
my6thgen.org Profile Info.
 
Jony09's Avatar
 
Join Date: Sep 2011
Official Member #: 3079
Last Online: 10-08-2014 03:48 PM
Location: Houston
Posts: 385

Reputation Level: 8
Jony09 is an unknown quantity at this point

Participation Level: 0%
Activity: 0% Activity: 0% Activity: 0%
Default Re: SES light

Originally Posted by BurntOrangeAppeal View Post
P2100 > Throttle Control Motor Relay
P2101 > Electric Throttle Control Function

You either disconnected or pulled on the throttle plug/wires or your throttle body failed...
Makes sure everything is plugged in and the connector to the throttle body is ok and wires are not pulled out. Clear codes and perform the throttle re-learns below.

Conditions must be met.
No codes, engine at operating temp, all electrical loads off ie. headlights, heater, doors closed, handbrake not applied, steering wheel centered.

Accelerator Pedal Release Position Learning
Operation Procedure

1. Make sure that the accelerator pedal is fully released.
2. Turn ignition switch ON and wait at least 2 seconds.
3. Turn ignition switch OFF wait at least 10 seconds.
4. Turn ignition switch ON and wait at least 2 seconds.
5. Turn ignition switch OFF wait at least 10 seconds.

Throttle Valve Closed Position Learning
Operation Procedures

1. Make sure that accelerator pedal is fully released.
2. Turn ignition switch ON.
3. Turn ignition switch is OFF? wait at least 10 seconds.
Thanks I disconnected my battery for a while turned on the car and the light was not on. I will try the steps if it turns on tomorrow when i drive it.
Thanks again
Likes: (1)
BurntOrangeAppeal (11-15-2012)
Jony09 is offline   Send a private message to Jony09 Find more posts by Jony09 Add Jony09 to Your Friends list Reply With Quote top
Reply


Currently Active Users Viewing This Thread: 1 (0 Members And 1 Guests)
 
Thread Tools


All times are GMT -4. The time now is 06:42 AM.