Originally Posted by MrBruno
sorry to bring this back from the dead, but i had to.
packet you said about 25 min to properly burp it, is there a way to tell that its good 2 go? other than just putting it back together and starting it up? my car has had the sloshing since the day i bought it almost, but the heater never acted up til this year.
im gonna give that a try and hopefully it will help. i need to seafoam too so maybe ill do both this weekend.
thanks for the help guys, as always.
You basically let the car idle , turn on the HEAT and Only HEAT inside the car no A/C , rev up and hold it about 1500rpm for a good min or 2 ,
Then the air bubbles will start bubbling , and just let the car idle and heat up for 20 mins or so , just watch the Rad neck and all the air should travel up.
Alot of people dont realized that they should burp the rad at least twice a year, guys like us in FLORIDA esp since were usually year around in warm weather.